After you install LinuxCNC several sample files are placed in the /nc_files folder. Make sure the sample file is appropriate for your machine before running.

1. Mill Examples

1.1. Helical Hole Milling

  • File Name: useful-subroutines.ngc

  • Description: Subroutine for milling a hole using parameters.

1.2. Slotting

  • File Name: useful-subroutines.ngc

  • Description: Subroutine for milling a slot using parameters.

Useful subroutines

1.3. Grid Probe

  • File Name: gridprobe.ngc

  • Description: Rectangular Probing

This program repeatedly probes in a regular XY grid and writes the probed location to the file probe-results.txt in the same directory as the .ini file.

Grill probe

1.4. Smart Probe

  • File Name: smartprobe.ngc

  • Description: Rectangular Probing

This program repeatedly probes in a regular XY grid and writes the probed location to the file probe-results.txt in the same directory as the .ini file. This is improved from the grid probe file.

The finer probing grid

1.5. Tool Length Probe

  • File Name: tool-length-probe.ngc

  • Description: Tool Length Probing

This program shows an example of how to measure tool lengths automatically using a switch hooked to the probe input. This is useful for machines without tool holders, where the length of a tool is different every time it is inserted.

1.6. Hole Probe

  • File Name: probe-hole.ngc

  • Description: Finding the Center and Diameter of a hole.

The program demonstrates how to find the center of a hole, measure the hole diameter and record the results.

1.7. Cutter Compensation

  • File Name: comp-g1.ngc

  • Description: Entry and exit movements with compensation of tool radius.

This program demonstrates the peculiarity of the toolpath without and with tool radius compensation. The tool radius is taken from the tool table.

2. Lathe Examples

2.1. Threading

  • File Name lathe-g76.ngc

  • Description: Facing, threading and parting off.

This file shows an example of threading on a lathe using parameters.