Index

• .axisrc
• .emcrc
• ABORT, [-]
• ACEX1K
• acme screw
• Advanced Configuration Options, [-]
• ANGULAR UNITS, [-], [-], [-]
• Auto, [-], [-], [-]
• Automatic Login
• Automatic Startup
• axes
• axes, primary linear
• axes, rotational
• axes, secondary linear
• axis, [-], [-]
• AXIS, [-]
• axis (hal pins)
• AXIS (inifile section)
• Axis Configuration, [-], [-], [-]
• Axis Travel, [-]
• backlash
• backlash compensation
• backplot, [-]
• ball nut
• ball screw
• BASE PERIOD
• Base Period Maximum Jitter, [-]
• Bit
• block delete
• blocks
• Bridgeport
• Calling Files
• Canned Cycles, [-]
• Cartesian machines
• cd, [-]
• Changing Directories, [-]
• Charge Pump, [-]
• Classic Ladder
• ClassicLadder, [-], [-], [-]
• CNC, [-], [-]
• CNC machines
• comments
• comp
• Compensation Off
• Conditional: if, else, endif
• controlled point, [-], [-]
• coolant, [-]
• coordinate measuring machine
• Coordinate System
• Cycles per revolution, [-]
• debounce
• Determining Spindle Calibration, [-]
• dir, [-]
• DISPLAY
• DISPLAY (inifile section)
• display units
• Distance to accelerate to max speed, [-]
• Driver Microstepping, [-]
• Driver Type, [-]
• DRO
• dwell
• Dynamic Cutter Radius Compensation
• Editing a Root File, [-]
• EDM
• EMC
• EMC (inifile section)
• EMCIO, [-]
• EMCIO (inifile section)
• EMCMOT
• EMCMOT (inifile section)
• EMCTASK
• enable signal
• encoder, [-], [-], [-]
, [-], [-], [-]
• ESTOP, [-], [-], [-], [-]
• External Editor
• F: Set Feed Rate
• feed, [-], [-], [-], [-]
• feed override, [-], [-], [-]
• feed rate, [-]
• feedback
• FERROR
• find, [-]
• Finding a File, [-]
• Finding Maximum Acceleration, [-]
• Finding Maximum Velocity, [-]
• Float
• G Code Best Practices
• G Code Comments
• G Code Debugging Messages
• G Code Messages
• G Code Order of Execution
• G Code Table
• G Codes
• G-Code
• G-code
• G0 Rapid
• G1 Linear Motion
• G2, G3 Arc
• G4 Dwell
• G7 Diameter Mode
• G8 Radius Mode
• G10 L1 Tool Table
• G10 L2 Coordinate System
• G17, G18, G19 Plane Selection
• G20, G21 Length Units
• G28, G28.1
• G30, G30.1
• G33, G33.1 Spindle-Synchronized Motion
• G38.x Straight Probe
• G40, G41, G41.1, G42, G42.1 Cutter Compensation
• G43, G43.1, G49 Tool Length Offsets
• G53, [-]
• G53 Absolute Coordinates
• G54, [-], [-]
• G54 - G59.3 Select Coordinate System
• G55, [-], [-], [-]
• G56, [-], [-]
• G57, [-], [-]
• G58, [-], [-]
• G59, [-], [-]
• G59.1, [-], [-]
• G59.2, [-], [-]
• G59.3, [-], [-]
• G61, G61.1, G64 Path Control
• G73 Drilling Cycle Chip Break
• G76 Threading
• G80
• G80 Cancel Modal Motion
• G81
• G81 Drilling Cycle
• G82
• G82 Drilling Cycle Dwell
• G83
• G83 Peck Drilling
• G84
• G84 Right-Hand Tapping
• G85
• G85 Boring, No Dwell, Feed Out
• G86
• G86 Boring, Spindle Stop, Rapid Out
• G87
• G87 Back Boring
• G88
• G88 Boring, Spindle Stop, Manual Out
• G89
• G89 Boring, Dwell, Feed Out
• G90, G91 Set Distance Mode
• G91 with G98-99
• G92, [-]
• G92, G92.1, G92.2, G92.3 Offsets
• G92.1
• G92.2
• G92.3
• G93, G94, G95: Feed Rate Mode
• G96, G97 Spindle Control Mode
• G98
• G98, G99 Canned Cycle Return
• G99
• General Logging
• gksudo, [-]
• GNU-Linux
• GPL
• grep, [-]
• GUI, [-]
• HAL, [-], [-], [-]
• HAL (inifile section)
• HAL Component
• HAL Function
• HAL Parameter
• HAL Physical-Pin
• HAL Pin
• HAL Signal
• HAL Thread
• HAL Type
• hal-ax5214h
• hal-m5i20
• hal-motenc
• hal-parport
• hal-ppmc
• hal-stg
• hal-vti
• halcmd
• halmeter
• halscope
• halui, [-]
• HOME
• home
• Home and Limit Switch wiring options, [-]
• HOME IGNORE LIMITS
• HOME IS SHARED
• Home Latch Direction, [-]
• HOME LATCH VEL
• Home Location, [-], [-], [-]
• HOME OFFSET
• HOME SEARCH VEL, [-]
• Home Search Velocity, [-]
• HOME SEQUENCE
• Home Switch Location, [-], [-], [-]
• HOME USE INDEX
• Indirection
• INI, [-], [-]
• ini [FILTER] Section
• INPUT SCALE, [-]
• Inputs and Outputs, [-]
• Installing: LiveCD
• Installing: manual
• Installing: script
• Instance
• iocontrol
• iocontrol (HAL pins)
• jog
• Jog Speed
• jog speed, [-]
• joint coordinates
• keystick, [-]
• KEYSTICK
• kinematics, [-]
• Lathe Threading, [-]
• lead screw
• Leadscrew Pitch, [-]
• Line Number
• LINEAR UNITS
• Linux, [-]
• Linux FAQ, [-]
• Listing files in a directory, [-]
• loop
• Looping: do, while, endwhile, break, continue
• ls, [-]
• M0, M1, M2, M30, M60 Program Pause/End
• M3, M4, M5 Spindle Control
• M6 Tool Change
• M7, M8, M9 Coolant Control
• M48, M49 Override Control
• M50 Feed Override Control
• M51 Spindle Speed Override
• M52 Adaptive Feed Control
• M53 Feed Stop Control
• M61 Set Current Tool Number
• M62 to M65 Output Control
• M66 Input Control
• M100 to M199 User Defined Commands
• Machine Name, [-]
, [-]
• machine on
• Machine Units
• machine units, [-]
• Man Pages, [-]
, [-], [-]
• Manual, [-], [-], [-], [-]
• Manual Tool Change
• MAX ACCELERATION
• MAX LIMIT
• Max Step Rate, [-]
• MAX VELOCITY
• Max Velocity
• Maximum Acceleration, [-]
• Maximum Velocity, [-]
, [-], [-], [-], [-]
• MDI, [-], [-], [-], [-]
• Mesa HostMot2
• Min Base Period, [-]
• MIN FERROR
• MIN LIMIT, [-], [-]
• mini
• Minimum Requirements, [-]
• MIST
• Modal Groups
• motion
• motion (hal pins)
• Motor Steps Per Revolution, [-]
• Multi-session Download, [-]
• mux2.9
• mux4.9
• NIST, [-]
• NML
• not.9
• O Codes
• offset.9
• offsets
• OMAC
• oneshot.9
• Onscreen Prompt For Tool Change, [-]
• open
• Open Source
• OpenGL
• Operating without Home Switches, [-]
• Operating without Limit Switches, [-]
• operator precedence
• optional block delete
• optional program stop, [-]
• optional stop
• or2.9
• Output pinout presets, [-]
• parallel port
• Parallel Port Setup, [-]
• PARAMETER FILE
• parameters
• part Program
• path control mode
• pause
• pid, [-]
• pid.9
• pinout
• PLC
• pluto-servo
• pluto-servo alternate pin functions
• pluto-servo pinout
• pluto-step
• pluto-step pinout
• pluto-step timings
• position: absolute
• Position: Actual
• position: actual
• Position: Commanded
• position: commanded
• Position: Machine
• Position: Relative
• position: relative
• preview plot
• Probe Logging
• program extents
• program units
• Pulley Ratio, [-]
• Pulse rate at max speed, [-]
• pwd, [-]
• PWM 1 and 2, [-]
• PWM Rate, [-]
• pwmgen
• Python, [-]
• pyVCP
• rapid
• RCS
• real-time
• Repeat
• resume
• RS274NGC
• RS274NGC (inifile section)
• RS274NGC STARTUP CODE
• RTAI
• RTAPI
• RTLINUX
• run
• s32
• S: Set Spindle Speed
• Searching for Text, [-]
• servo motor
• SERVO PERIOD
• setp, [-]
• Sherline
• siggen, [-]
• signal polarity
• Signed Integer
• sim-encoder
• Special Comments
• Speed 1 and 2, [-]
, [-], [-]
• spindle, [-], [-]
• Spindle A, [-]
• Spindle B, [-]
• Spindle Configuration, [-]
• Spindle Override
• Spindle PPR, [-]
• spindle speed control, [-]
, [-], [-]
• spindle speed override, [-]
• spindle-synchronized motion, [-]
• standard pinout
• step
• step rate
• Stepconf Wizard, [-]
• stepgen, [-]
• stepper
• stepper motor
• Subroutines: sub, endsub, return, call
• sudo gedit, [-]
• supply
• T: Select Tool
• Table Travel, [-]
• TASK
• TASK (inifile section)
• TBL
• Tcl
• Terminal Commands, [-]
• Test this axis, [-]
• time
• Time to accelerate to max speed, [-]
, [-]
• Tk, [-], [-], [-]
• tkemc
• tmax, [-]
• Touch Off
• TRAJ (inifile section)
• TRAJ PERIOD
• Traverse Move
• Trivial Kinematics
• u32
• Ubuntu, [-]
• units, [-], [-], [-]
• UNITS
• Unsigned Integer
• Updates to EMC2, [-]
• VAR
• verify
• Virtual Control Panel
• Wget Linux, [-]
• Wget Windows, [-]
• Word
• Working Directory, [-]
• world coordinates
• xemc