xyzac-trt-gui(1) Manual Page

xyzac-trt-gui is one of the sample Vismach GUIs for LinuxCNC, simulating a 5-axis milling machine with tool-point kinematics.

See the main LinuxCNC documentation for more details.

linuxcnc(1)

Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/LinuxCNC/.

None known at this time.

This man page written by Andy Pugh, as part of the LinuxCNC project.

Сообщайте об ошибках по адресу https://github.com/LinuxCNC/linuxcnc/issues.

Copyright © 2020 Andy Pugh.

This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.