motion-logger(1) Manual Page

motion-logger

motion-logger is a test program to log motion commands sent from LinuxCNC’s Task module to the Motion module.

It is largely used by the regression tests and is poorly documented.

linuxcnc(1)

Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/LinuxCNC/.

None known at this time.

This man page written by Andy Pugh, as part of the LinuxCNC project.

Сообщайте об ошибках по адресу https://github.com/LinuxCNC/linuxcnc/issues.

Copyright © 2020 Andy Pugh.

This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.