СИНОПСИС
mdi
ОПИСАНИЕ
mdi sends G-code commands to LinuxCNC. The command starts an envirmonemt in which G-code commands are sent to the interpreter and machine feedback is displayed.
ИСПОЛЬЗОВАНИЕ
send a single command and exit:
mdi m2 s1400
Интерактивная сессия
$mdi MDI> m3 s1000 MDI> G0 X100 MDI> ^Z $stopped
СМОТРИТЕ ТАКЖЕ
linuxcnc(1)
Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/LinuxCNC/.
BUGS
None known at this time.
АВТОР
This man page written by Andy Pugh, as part of the LinuxCNC project.
СООБЩЕНИЕ ОБ ОШИБКАХ
Сообщайте об ошибках по адресу https://github.com/LinuxCNC/linuxcnc/issues.
АВТОРСКОЕ ПРАВО
Copyright © 2020 Andy Pugh.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.