NEWS
LinuxCNC 2.5.2 Release
There are no translations available.

LinuxCNC 2.5.2 Update Released (changelog).
 
LinuxCNC 2.5.1 Release
There are no translations available.

LinuxCNC 2.5.1 Update Released (changelog). If the Package Manager does not prompt you to upgrade see this page.
 
LinuxCNC 2.5.0 Release
There are no translations available.

New major release (changelog). See the instructions to update your system from EMC 2.4 to LinuxCNC 2.5.
 
Home Forum General General LinuxCNC Questions step direction spindle also functions as C axis

Welcome, Guest
Username: Password: Remember me
Forgot your password? Forgot your username?

TOPIC: step direction spindle also functions as C axis

Re:step direction spindle also functions as C axis 31 Ago 2012 06:46 #23798

  • stevestice
  • stevestice's Avatar
  • OFFLINE
  • Junior Boarder
  • Posts: 20
  • Karma: 0
Hi The opto 22 works great. I have had to change my spindle design for now. I have changed to a 1/3 hp 3 phase motor with a automation direct gs1 drive.
I am using the inputs on the drive and opto outputs for direction control. I am wanting to add speed control. I have not got into the manuals yet would the gs2 vfd driver be
the way to go or can I add 0 to10 volt output with a opto 22 G4DA5 analog dc output? I know the analog module will not work with the pci-ac5, what interface/board do the
opto analog module work with? Also can some one point me in the right direction I have been working on my manual pulse generator with little success I have found a hal file but have been able to modify it to work. Thanks Steve
The administrator has disabled public write access.
Time to create page: 1.066 seconds
Powered by Kunena Forum
© 2013 LinuxCNC.org
Joomla! is Free Software released under the GNU General Public License.