iocontrol - interacts with HAL or G-code in non-realtime
[EMCIO]
EMCIO = io
or
EMCIO = iov2
I/O control
handles I/O tasks like coolant, toolchange, E-stop and lube.
The signals are turned on and off in non-realtime with
G-code or in the case of E-stop in HAL.
I/O Control V2 (iov2) adds more toolchager support for
communication with the toolchanger.
Whether io or iov2 is used can be chosen in the [EMCIO] section of the INI file.
See also <http://linuxcnc.org/docs/html/config/iov2.html>
io(1), <io.1.html> iov2(1) <iov2.1.html>