limit2 − Limit the output signal to fall between min and max and limit its slew rate to less than maxv per second. When the signal is a position, this means that position and velocity are limited.
|
loadrt limit2 [count=N|names=name1[,name2...]] |
limit2.N (requires a floating-point thread)
limit2.N.in
float in
limit2.N.out float out
limit2.N.load bit in
When TRUE, immediately set out to in, ignoring maxv
limit2.N.min
float rw (default: -1e20)
limit2.N.max float rw (default:
1e20)
limit2.N.maxv float rw (default:
1e20)
GPL