knob2float − Convert counts (probably from an encoder) to a float value
|
loadrt knob2float [count=N|names=name1[,name2...]] |
knob2float.N (requires a floating-point thread)
knob2float.N.counts s32 in
Counts
knob2float.N.enable bit in
When TRUE, output is controlled by count, when FALSE, output is fixed
knob2float.N.scale float in
Amount of output change per count
knob2float.N.out float out
Output value
knob2float.N.max-out float rw (default: 1.0)
Maximum output value, further increases in count will be ignored
knob2float.N.min-out float rw (default: 0.0)
Minimum output value, further decreases in count will be ignored
GPL