axis-remote - AXIS Remote Interface
axis-remote OPTIONS|FILENAME
axis-remote
is a small script that triggers commands in a running AXIS
GUI.
Use axis-remote --help for further information.
--ping, -p
Check whether AXIS is running.
--reload, -r
Make AXIS reload the currently loaded file.
--clear, -c
Make AXIS clear the backplot.
--quit, -q
Make AXIS quit.
--help, -h, -?
Display a list of valid parameters for axis-remote.
--mdi COMMAND, -m COMMAND
Run the MDI command COMMAND.
FILENAME
Load the G-code file FILENAME.
axis(1)
Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/linuxcnc/.
None known at this time.
This man page written by Alex Joni, as part of the LinuxCNC project.
Report bugs at https://github.com/LinuxCNC/linuxcnc/issues
Copyright
© 2007 Alex Joni.
This is free software; see the source for copying
conditions. There is NO warranty; not even for
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.