wj200_vfd − Hitachi wj200 modbus driver
float in Frequency of vfd
bit in 1 when reverse 0 when forward
bit in run the vfd
bit in 1 to enable the vfd. 0 will remote trip the vfd, thereby disabling it.
bit out 1 when running
bit out 1 when running at assigned frequency
bit out 1 when vfd is ready to run
bit out 1 when vfd alarm is set
float out Output current in amps
float out Temperature of drive heatsink
bit out Alternates between 1 and 0 after every update cycle. Feed into a watchdog component to ensure vfd driver is communicating with the vfd properly.
u32 rw Modbus slave address
GPLv2 or greater