SYNOPSIS
loadrt edge [count=N|names=name1[,name2…]]
FUNCTIONS
- edge.N
-
Produce output pulses from input edges
PINS
- edge.N.in bit in
-
- edge.N.out bit out
-
Goes high when the desired edge is seen on in
- edge.N.out-invert bit out
-
Goes low when the desired edge is seen on in
PARAMETERS
- edge.N.both bit rw (default: FALSE)
-
If TRUE, selects both edges. Otherwise, selects one edge according to in-edge
- edge.N.in-edge bit rw (default: TRUE)
-
If both is FALSE, selects the one desired edge: TRUE means falling, FALSE means rising
- edge.N.out-width-ns s32 rw (default: 0)
-
Time in nanoseconds of the output pulse
- edge.N.time-left-ns s32 r
-
Time left in this output pulse
- edge.N.last-in bit r
-
Previous input value
AUTHOR
Jeff Epler
LICENSE
GPL