sim-torch - A simulated plasma torch
|
loadusr Wn sim-torch sim-torch |
A simulated plasma torch for arc-ok testing.
VERSION:
0.1
sim-torch-rt.cut-noise-in float in (default: 0.75)
the maximum amount of noise during cutting (volts)
sim-torch-rt.cycles-in s32 in (default: 200)
the number of cycles that the arc voltage overshoots the cut voltage (cycles)
sim-torch-rt.on-delay-in s32 in (default: 10)
the time from turn on until overshoot begins (cycles)
sim-torch-rt.offset-in float in
the cut voltage offset(volts)
sim-torch-rt.overshoot-in s32 in (default: 50)
the percentage of the cut voltage that the arc voltage overshoots (percent)
sim-torch-rt.ramp-noise-in float in (default: 5)
the maximum amount of noise during overshoot (volts)
sim-torch-rt.ramp-up-in s32 in (default: 80)
percent of ’cycles_in’ that the arc voltage ramps up (percent)
sim-torch-rt.start bit in
start the arc
sim-torch-rt.voltage-in float in (default: 100)
the cut voltage (volts)
sim-torch-rt.voltage-out float out
output voltage (volts)
Phillip A Carter
GPLv2 or greater