SYNOPSIS
qtvcp [OPTIONS] myfile.ui
DESCRIPTION
QtVCP is a system for creating user interfaces for LinuxCNC.
Full documentation at https://linuxcnc.org/docs/html/gui/qtvcp.html
OPTIONS
- -h, --help
-
Show this help message and exit.
- -c [<NAME>]
-
Set component name to NAME. Default is basename of UI file.
- -a
-
Set the window to always be on top.
- -d
-
Enable debug output.
- -v
-
Enable verbose debug output.
- -q
-
Enable only error debug output.
- -g [<GEOMETRY>]
-
Set geometry WIDTHxHEIGHT+XOFFSET+YOFFSET. Values are in pixel units, XOFFSET/YOFFSET is referenced from top left of screen. Use -g WIDTHxHEIGHT for just setting size or -g +XOFFSET+YOFFSET for just position.
Example:-g 200x400+0+100 - -H [<FILE>]
-
Execute HAL statements from FILE with halcmd after the component is set up and ready.
- -i
-
Enable info output.
- -m
-
Force panel window to maximize.
- -f
-
Force panel window to fullscreen.
- -t [<THEME>]
-
Set Qt style. Default is system theme.
- -x [<XID>]
-
Reparent QtVCP into an existing window XID instead of creating a new top level window.
- --push_xid
-
Reparent window into a plug add push the plug xid number to standardout.
- -u [<USERMOD>]
-
File path of user defined handler file.
- -o [<USEROPTS>]
-
Pass USEROPTS strings to handler under self.w.USEROPTIONS_ list variable.
SEE ALSO
linuxcnc(1)
Much more information about LinuxCNC and HAL is available in the LinuxCNC and HAL User Manuals, found at /usr/share/doc/LinuxCNC/.
BUGS
None known at this time.
AUTHOR
This man page written by Andy Pugh, as part of the LinuxCNC project.
REPORTING BUGS
Report bugs at https://github.com/LinuxCNC/linuxcnc/issues.
COPYRIGHT
Copyright © 2020 Andy Pugh.
This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.