select8 - 8-bit binary match detector
loadrt select8 [count=N|names=name1[,name2...]] |
select8.N
select8.N.enable bit in (default: TRUE)
Set enable to FALSE to cause all outputs to be set FALSE.
select8.N.sel s32 in
The number of the output to set TRUE. All other outputs well be set FALSE.
select8.N.outM bit out (M=0..7)
Output bits. If enable is set and the sel input is between 0 and 7, then the corresponding output bit will be set true.
demux(9)
Stephen Wille Padnos
GPL