|
clarke2 − Two input version of Clarke transform |
|
loadrt clarke2 [count=N|names=name1[,name2...]] |
|
The Clarke transform can be used to translate a vector quantity from a three phase system (three components 120 degrees apart) to a two phase Cartesian system. clarke2 implements a special case of the Clarke transform, which only needs two of the three input phases. In a three wire three phase system, the sum of the three phase currents or voltages must always be zero. As a result only two of the three are needed to completely define the current or voltage. clarke2 assumes that the sum is zero, so it only uses phases A and B of the input. Since the H (homopolar) output will always be zero in this case, it is not generated. |
|
clarke2.N (uses floating-point) |
|
clarke2.N.a float in |
|
clarke2.N.b float in |
|
first two phases of three phase input |
|
clarke2.N.x float out |
|
clarke2.N.y float out |
|
cartesian components of output |
|
clarke3 for the general case, clarkeinv for the inverse transform. |
|
GPL |