This documentation is no longer maintained. For documentation of the current version of emc2, please see http://www.linuxcnc.org/docview/html

rtapi_delay

NAME
SYNTAX
ARGUMENTS
DESCRIPTION
REALTIME CONSIDERATIONS
RETURN VALUE
SEE ALSO

NAME

rtapi_delay − one-line description of rtapi_delay

SYNTAX

void rtapi_delay(long int nsec)

void rtapi_delay_max()

ARGUMENTS

nsec

The desired delay length in nanoseconds

DESCRIPTION

rtapi_delay is a simple delay. It is intended only for short delays, since it simply loops, wasting CPU cycles.

rtapi_delay_max returns the max delay permitted (usually approximately 1/4 of the clock period). Any call to rtapi_delay requesting a delay longer than the max will delay for the max time only.

rtapi_delay_max should be called before using rtapi_delay to make sure the required delays can be achieved. The actual resolution of the delay may be as good as one nano-second, or as bad as a several microseconds.

REALTIME CONSIDERATIONS

May be called from init/cleanup code, and from within realtime tasks.

RETURN VALUE

rtapi_delay_max returns the maximum delay permitted.

SEE ALSO

rtapi_clock_set_period(3rtapi)