Format: 1.8 Date: Tue, 18 Jul 2017 21:02:57 -0600 Source: linuxcnc Binary: linuxcnc-uspace-dev linuxcnc-uspace linuxcnc-doc-en linuxcnc-doc-fr linuxcnc-doc-es Architecture: source i386 all Version: 1:2.7.10 Distribution: unstable Urgency: medium Maintainer: Sebastian Kuzminsky Changed-By: Sebastian Kuzminsky Description: linuxcnc-doc-en - PC based motion controller for real-time Linux linuxcnc-doc-es - PC based motion controller for real-time Linux linuxcnc-doc-fr - PC based motion controller for real-time Linux linuxcnc-uspace - PC based motion controller for real-time Linux linuxcnc-uspace-dev - PC based motion controller for real-time Linux Changes: linuxcnc (1:2.7.10) unstable; urgency=medium . * docs: document [EMCMOT]COMM_TIMEOUT * docs: teach buildsystem to generate manpages from asciidoc source * docs: add info about the Touchy radio buttons * docs: improve some hm2_bspi manpages . * gmoccapy: added Num_Pad jogging * image-to-gcode: work around gratuitous breakage in PIL . * GladeVCP: don't exit if CombiDRO fails to poll status . * hy_vfd: add --motor-poles, to set PD143 * hy_vfd: add --base-frequency to set PD004 on the VFD * hy_vfd: document PD004/base-freq better in the manpage * hy_vfd: fix some typos in --help output and comments . * add a driver for the Huanyang GT series VFD . * hm2_eth: add support for Mesa 7i93 AnyIO ethernet board * hm2_sserial: Fix a bug where the second port would not work if the first was disabled . * gcodemodule: make interp really close part program * pluto: use rtapi's fabs() instead of the kernel's abs() * steptest: don't change position-cmd when not running . * uspace: find top online CPU . * tests: make timeouts simpler & smarter in halui/jogging test . * build: fix building linuxcnc.1 when docs not requested * build: don't fail when requested not to build documentation * build: ensure asciidoc manpages are built before checklink is run * build: build-depend on asciidoc-dblatex on debian stretch * build: on Debian Stretch and newer, depend on gstreamer 1.0 * build: add debian/configure stanza for debian stretch * build: rename the GS2 VFD Makefile variables for clarity Checksums-Sha1: 346d79def68a5d5898454b73cbc3caab4f26a6cd 1455 linuxcnc_2.7.10.dsc 9ccd01905dc8b876303e33c046e4b4f1caeb3098 24717930 linuxcnc_2.7.10.tar.gz a12c37cbf12039b82281644ec623625496c9cee9 670436 linuxcnc-uspace-dev_2.7.10_i386.deb a87de48e1d4caf01ff13395abdad82c226edce41 5613910 linuxcnc-uspace_2.7.10_i386.deb 3df705697a645d259462c22356a856dd8a36f954 12320374 linuxcnc-doc-en_2.7.10_all.deb e86d86237387192ab3e6adf9ba4512dfb1dd440a 6591154 linuxcnc-doc-fr_2.7.10_all.deb ca59ef1cf7b3a88bb406755fe544c5b5b875d48c 11604612 linuxcnc-doc-es_2.7.10_all.deb Checksums-Sha256: eea968ff136c45e8cccb5a6dbb0ae08168033be1be6cb6661ef02ff453b48aa4 1455 linuxcnc_2.7.10.dsc 17812d434fe2338cd4180e7406f32fb1a82a44a18b0e765fc5162210e059e95d 24717930 linuxcnc_2.7.10.tar.gz 4820ba7d43d1612c8483def5a8505dea187896da2fac940817b534158d3907b8 670436 linuxcnc-uspace-dev_2.7.10_i386.deb e7bdfd51a8d8fe4ea4818c55f3be17a3dc909169cdac0ffcb41395ceee407e25 5613910 linuxcnc-uspace_2.7.10_i386.deb ae8dfa35dd9dfa16cb7a9fc1b9987a09f23e159fbc91c9de71c8bbcefbb32daa 12320374 linuxcnc-doc-en_2.7.10_all.deb 1fe123b7133c9afc87a009312720284b13fc3ffb869943b2aa977d87766ec215 6591154 linuxcnc-doc-fr_2.7.10_all.deb fb46146ae8d4b56d7dd2f771a09849dee1fdd23ba9e47de3a791ff4aca884a45 11604612 linuxcnc-doc-es_2.7.10_all.deb Files: 5e9a5d487a7f6521b6fa5aa7228d6562 1455 misc extra linuxcnc_2.7.10.dsc 4c0b85642cc66ada251ef4be8c912b97 24717930 misc extra linuxcnc_2.7.10.tar.gz b5895ee4192056318ae0bf018527ac06 670436 libs extra linuxcnc-uspace-dev_2.7.10_i386.deb 9bc5abf95830030707d6d319493abb7f 5613910 misc extra linuxcnc-uspace_2.7.10_i386.deb 493f2f66bd1be6260560778db6582b5a 12320374 misc extra linuxcnc-doc-en_2.7.10_all.deb 159056895a121df4353f0c9a5ef94a65 6591154 misc extra linuxcnc-doc-fr_2.7.10_all.deb ebbc99fa774911d5e415ed7137d2d2a5 11604612 misc extra linuxcnc-doc-es_2.7.10_all.deb