Format: 1.8 Date: Fri, 02 Jun 2017 12:49:44 -0600 Source: linuxcnc Binary: linuxcnc-uspace-dev linuxcnc-uspace linuxcnc-doc-en linuxcnc-doc-fr linuxcnc-doc-es Architecture: source Version: 1:2.7.9 Distribution: unstable Urgency: medium Maintainer: Sebastian Kuzminsky Changed-By: Sebastian Kuzminsky Description: linuxcnc-doc-en - PC based motion controller for real-time Linux linuxcnc-doc-es - PC based motion controller for real-time Linux linuxcnc-doc-fr - PC based motion controller for real-time Linux linuxcnc-uspace - PC based motion controller for real-time Linux linuxcnc-uspace-dev - PC based motion controller for real-time Linux Changes: linuxcnc (1:2.7.9) unstable; urgency=medium . * support "auxiliary apps", distributed separately from LinuxCNC . * docs: add a bit more info to position feedback ini setting * docs: sort board list in hm2_eth manpage * docs: fix pyvcp multi label description * docs: fix pyvcp example so it runs * docs: clarify return value in hal_pin_new(3) manpage * docs: add missing var section to index header * docs: add machine building info to integrator document * docs: add manpage for hal_parport realtime component * docs: add units info to halui max-velocity pins in manpage * docs: flesh out max-velocity pins in halui manpage * docs: fix incorrect info for stat.motion_type and stat.motion_mode * docs: code notes: a pose has 9 coordinates, not 6 * docs: add hal_manualtoolchange manpage * docs: add info about remap debug messages * docs: fix paraport/parport typos * docs: fix pin names in thcud manpage example HAL config * docs: clean up the note about T0 handling * docs: add some info for the hal python module * docs: clarify an ambiguity about siggen in the HAL documentation * docs: add information about addf command in the HAL documentation * docs: add details on epp_dir command line parameter of hal_ppmc * docs: remove a footnote about the behavior of emc2 v2.4 * docs: add or2 example * docs: fix description of USER_DEFINED_FUNCTION_MAX_DIRS in ini-config * docs: clarify g28/30 description * docs: add link to G54-G59.3 User Coordinates section * docs: clean up Machine Coordinate System section * docs: remove M6 from modal group description * docs: add links to machine origin from several places * docs: fix typos and markup problems all over * docs: add more information about the addf command * docs: sorted gmoccapy video links with headlines * docs: add a known problem with macros to gmoccapy docs * docs: fix cut-n-paste bug in mb2hal manpage * docs: expand on different ways of starting LinuxCNC * docs: document some features of the Axis GUI * docs: add info about the basic directory structure * docs: correct misleading descriptions of named parameters * docs: update info about 'save' command in halcmd manpage & help . * Axis GUI: avoid unbounded memory growth in text widgets on stretch * Axis GUI: make tool info display widget larger * Axis GUI: remove unused .info.offset widget * Axis GUI: shorten tool touch off widget title text * gmoccapy GUI: removed unused code * gmoccapy GUI: added get_joints_amount() for compatibility 2.7 and master * gmoccapy GUI: new hal pin gmoccapy.ignore-limits * gmoccapy GUI: bug if no macros in ini file * gmoccapy GUI: bug in macro button handling * gmoccapy GUI: G96 bug solved * gscreen GUI: fix missing .themes folder error * halui: fix halui.program.run . * gladeVCP: make CombiDRO compatible for both 2.7 and master * gladeVCP: fix delta scale pin not updating if wheel scroll used * gladeVCP: add missing icon image for hal_dial . * pncconf: fix spindle command using wrong signal name * pncconf: fix sserial mode setting in HAL file . * hal_ppmc: add command line arg to turn on/off port direction change . * mitsub_vfd: add a driver for Mitsubishi VFDs . * classicladder: fix sequential variable access * classicladder: fix whitespace errors . * ilowpass: round the output instead of truncating . * halcmd: waitusr: avoid race condition . * hm2: better error message on unexpected pin descriptors * hm2_eth: don't segfault on interfaces without addresses . * linuxcnc python module: add doc string for stat.motion_mode * linuxcnc python module: add doc string for stat.motion_type * linuxcnc python module: add a doc string for stat.queued_mdi_commands * linuxcnc python module: add EMC_MOTION_TYPE_* constants . * hal python module: better doc strings for connect() and new_sig() . * Interp: fix a typo in a cutter-comp error message * Task: set the stat struct member queuedMDIcommands . * example g-code: fix Z value reported by rectangle_probe.ngc * example configs: fix hal pin names in gmoccapy_plasma * example configs: limit led without off color in gmoccapy_plasma * example configs: xhc-hb04.tcl: if prior connects, continue with msg . * rtapi: better error message when failing to connect . * uspace: allow calculated parameter array sizes . * tests: let introspection complete before continuing in the t0 tests * tests: fixup hm2-idrom test to match new hm2 PD error message * tests: add a test of ilowpass with low gain * tests: reorg ilowpass test so i can add a low-gain test next to it * tests: add a test of stat.queued_mdi_commands * travis: manually uninstall gpl3 readline * build: fix link error on i686 with gcc, or maybe objcopy 2.27 * packaging: add the new LinuxCNC_Integrator pdf to the doc package Checksums-Sha1: ab4c5a15a75127c73b9b9a1d127a583c44fd40d4 1463 linuxcnc_2.7.9.dsc 0131eb9b340ba7ff1b01f5099238f91b5fe44bba 20807376 linuxcnc_2.7.9.tar.xz Checksums-Sha256: 3a1c5ab8cb66ae4ca28382100a646728fca205cfcd770dd9df8469b5d4ba01df 1463 linuxcnc_2.7.9.dsc c949c435c87aaabd058634dbbb4a7ee1e56b1c746969b2399ef8d378558fd093 20807376 linuxcnc_2.7.9.tar.xz Files: d74ffde63c10be992287858d2c2ee06e 1463 misc extra linuxcnc_2.7.9.dsc 7b4f5c6b550f290ecaa520ce8f51506b 20807376 misc extra linuxcnc_2.7.9.tar.xz