Format: 1.7
Date: Tue, 23 Jul 2013 12:34:46 -0500
Source: linuxcnc
Binary: linuxcnc-dev linuxcnc linuxcnc-doc-en linuxcnc-doc-fr linuxcnc-doc-de linuxcnc-doc-es linuxcnc-doc-pl
Architecture: source i386 all
Version: 1:2.5.3
Distribution: lucid
Urgency: low
Maintainer: Chris Radek <chris@timeguy.com>
Changed-By: Chris Radek <chris@timeguy.com>
Description: 
 linuxcnc   - PC based motion controller for real-time Linux
 linuxcnc-dev - PC based motion controller for real-time Linux
 linuxcnc-doc-de - PC based motion controller for real-time Linux
 linuxcnc-doc-en - PC based motion controller for real-time Linux
 linuxcnc-doc-es - PC based motion controller for real-time Linux
 linuxcnc-doc-fr - PC based motion controller for real-time Linux
 linuxcnc-doc-pl - PC based motion controller for real-time Linux
Changes: 
 linuxcnc (1:2.5.3) lucid; urgency=low
 .
   * AXIS: fix disable/enable of the toolbar's reload button
   * BUILD: fix linking on 32 bit x86 debian 7.1
   * Configs: use names= everywhere to make the sim configs clearer
   * Docs: Many improvements
   * HAL: clarkeinv: allow rotation of the input vector
   * HAL: sim_pin: add support for u32, s32, float types
   * HAL: abs_s32: don't unnecessarily require floating point
   * HAL: comp: fix option userinit
   * HAL: comp: improve handling of build failures and error reporting
   * HAL: twopass: improve error reporting
   * Hostmot2: fix smart serial port shutdown
   * Interpreter: Fix bug 315 part 2, O-call through named parameter
   * Kins: replace 5axiskins.c, used by a sample config
   * Kins: 5axiskins: remove misleading tool-length pin
   * Motion: allow for floating point in the base thread
   * PPMC: add encoder timestamp velocity estimation
   * PPMC: selectable encoder filter clock
   * PyVCP: fix several behaviors in the dial widget
   * Task: fix MDI-queueing problems
   * USC: new sample config for Pico USC with encoders
   * linuxcncrsh: many stability fixes
   * pncconf: fix 5i25 GPIO numbering
   * pncconf: fix default PDM rate
   * pncconf: fix open loop test
   * pncconf: fix incorrect zh_CN translation which broke millimeter mode
Files: 
 b8ca4f01a342cda58e05ee9c360932a7 1001 misc extra linuxcnc_2.5.3.dsc
 5ed2f18517cc5656f2337a8a55d14cbc 17831839 misc extra linuxcnc_2.5.3.tar.gz
 c91b61edac164df759dd7b77454b314e 579908 libs extra linuxcnc-dev_2.5.3_i386.deb
 366c5be5e1df35202979f53965116d7d 4072642 misc extra linuxcnc_2.5.3_i386.deb
 ab2da3f948e442454706186562cdd8a6 10338096 misc extra linuxcnc-doc-en_2.5.3_all.deb
 9479e2746323ba84ecefb98a1f96d7d8 8095818 misc extra linuxcnc-doc-fr_2.5.3_all.deb
 6b018f81a2cf62c1c6eeef34e8b233ab 10330428 misc extra linuxcnc-doc-de_2.5.3_all.deb
 7dc67a6c7e55e162392dd6164bffc2f7 10476524 misc extra linuxcnc-doc-es_2.5.3_all.deb
 c5bb3464912a177d3dd737bb865b84bf 10478804 misc extra linuxcnc-doc-pl_2.5.3_all.deb