Format: 1.7
Date: Sun, 03 Mar 2013 17:07:57 -0600
Source: linuxcnc
Binary: linuxcnc-dev linuxcnc linuxcnc-doc-en linuxcnc-doc-fr linuxcnc-doc-de linuxcnc-doc-es linuxcnc-doc-pl
Architecture: source amd64 all
Version: 1:2.5.2
Distribution: lucid
Urgency: low
Maintainer: Chris Radek <chris@timeguy.com>
Changed-By: Chris Radek <chris@timeguy.com>
Description: 
 linuxcnc   - PC based motion controller for real-time Linux
 linuxcnc-dev - PC based motion controller for real-time Linux
 linuxcnc-doc-de - PC based motion controller for real-time Linux
 linuxcnc-doc-en - PC based motion controller for real-time Linux
 linuxcnc-doc-es - PC based motion controller for real-time Linux
 linuxcnc-doc-fr - PC based motion controller for real-time Linux
 linuxcnc-doc-pl - PC based motion controller for real-time Linux
Changes: 
 linuxcnc (1:2.5.2) lucid; urgency=low
 .
   * AXIS: Allow the setting of the top end of the Max Velocity slider
     according to [DISPLAY]MAX_LINEAR_VELOCITY as the docs say
   * Components: Fix mux16's debounce function
   * Components: LCD character display driver
   * Components: New multiclick component detects single, double, triple clicks
   * Docs: Many improvements
   * Gremlin: Better error reporting for gcode errors
   * Gremlin: Fix rotated axes display
   * Halui: Include tool length offsets in relative position outputs
   * Hostmot2: Fixes to sserial
   * Kins: Fix teleop jogging of ABC axes in the negative direction
   * Modbus: Fix TCP communication time out error
   * New config: Gecko G540
   * New config: Smithy 1240combined_mm
   * PID: Optional new error-previous-target mode to reduce ferrors detected
     by motion.  This is especially useful for torque-mode loops and those
     tunings that use large I gains
   * pncconf: Many fixes
   * PPMC: Better error checking for hardware problems causing miscommunication
   * Tool Table: Many fixes to tool table handling, making tool tables on
     nonrandom setups using mismatched tool and pocket numbers work correctly
   * Translations: German for tooledit
   * Translations: Many improvements to French
   * Utilities: new latencyhistogram program that shows details about latency
   * Utilities: sim_pin, a script that simulates writing to hal pins
Files: 
 9d49b8326de1b1b87cbbc0ee71aeb16b 1001 misc extra linuxcnc_2.5.2.dsc
 134e139dbc3ead01ab2d250b6415cb45 17785256 misc extra linuxcnc_2.5.2.tar.gz
 1ca8ebd3b1de5f49854f4c1adc5b549f 575790 libs extra linuxcnc-dev_2.5.2_amd64.deb
 dd74d2ce215adc34784d7b7488ca174d 8870520 misc extra linuxcnc_2.5.2_amd64.deb
 32d175eb024ce01f129b41d84deb1c9c 11131768 misc extra linuxcnc-doc-en_2.5.2_all.deb
 7e1576a26ecd202c061e2d1352dd8349 8909016 misc extra linuxcnc-doc-fr_2.5.2_all.deb
 20f081a4c73a008aa7af190c7d3706ab 11805586 misc extra linuxcnc-doc-de_2.5.2_all.deb
 d92b2543a7bbea89da483e6a690918cc 11836048 misc extra linuxcnc-doc-es_2.5.2_all.deb
 f5f2d5d366c61bc2d67fcc6e086d1128 11826962 misc extra linuxcnc-doc-pl_2.5.2_all.deb