Format: 1.7 Date: Fri, 30 Mar 2012 13:20:02 -0500 Source: linuxcnc Binary: linuxcnc-dev linuxcnc linuxcnc-doc-en linuxcnc-doc-fr linuxcnc-doc-de linuxcnc-doc-es linuxcnc-doc-pl Architecture: source amd64 all Version: 1:2.5.0 Distribution: lucid Urgency: low Maintainer: Chris Radek Changed-By: Chris Radek Description: linuxcnc - PC based motion controller for real-time Linux linuxcnc-dev - PC based motion controller for real-time Linux linuxcnc-doc-de - PC based motion controller for real-time Linux linuxcnc-doc-en - PC based motion controller for real-time Linux linuxcnc-doc-es - PC based motion controller for real-time Linux linuxcnc-doc-fr - PC based motion controller for real-time Linux linuxcnc-doc-pl - PC based motion controller for real-time Linux Changes: linuxcnc (1:2.5.0) lucid; urgency=low . * AXIS: dynamic tabs can embed other applications, including virtual control panels * AXIS: make the gcode readout resizable * AXIS: many speedups in preview generation * AXIS: new OpenGL preview with antialiased fonts * AXIS: optional blending in the program preview can make very complex programs easier to see * AXIS: prompt when homing a joint that's already homed * AXIS: Selectable tool touch off to workpiece or fixture * AXIS: show all offsets and rotation separately in the BIG DRO * AXIS: show G5x and G92 offsets graphically in the preview * AXIS: user-configurable MDI history file * AXIS: A comment (AXIS,notify,message) will print "message" when the preview is generated, instead of just at run-time. . * Configs: many configuration updates for Smithy machines * Configs: update motenc sample configs for encoder index * Configs: add filtering (image-to-gcode etc) to hostmot2 samples * Configs: univpwm sample uses new encoder velocity for pid . * GladeVCP: a new framework for making virtual control panels with the Glade screen designer . * Gremlin: AXIS's program preview is now separated out as gremlin, for use with GladeVCP/Touchy/etc. . * HAL: fix rare problem with freqgen output getting stuck "on" * HAL: gearchange component: support up to 32 gears * HAL: make commanded (unaffected by spindle override) spindle speed available on a pin, for gear selection etc. * HAL: make limit3 parameters into pins * HAL: new axis.N.motor-offset pins can be used to detect position loss between homings * HAL: new component bldc_sine: commutation for BLDC with encoder feedback * HAL: new mux16 component * HAL: new time comp, which converts seconds to hr/min/sec * HAL: new watchdog component * HAL: remove deprecated hal_m5i20 driver * HAL: new component for ShuttleXpress USB jog dongle * HAL: support names= options for encoder_ratio, sim_encoder, at_pid, siggen * HAL: a new component, message, to display user messages from HAL * HAL: a new component, multiswitch, to toggle through bits with one button . * Halshow: add menu with load/save/exit * Halshow: fix the tree to not cut off after a certain depth . * HAL: standardize on maximum hal name length . * HALUI: allow direct-value input to spindle and feed overrides and max velocity * HALUI: handle the situation better when many command inputs change simultaneously . * Hostmot2: fix a rare problem in stepgen mode setting * Hostmot2: fix stepgen moving VERY slowly when it should have been stopped * Hostmot2: handle failed card registration better * Hostmot2: support for multiplexed encoders like on the 7i48 * Hostmot2: support for onboard diagnostic LEDs * Hostmot2: support for three phase PWM * Hostmot2: improve watchdog reliability and defaults . * Interpreter: fixes to always use . for a decimal, no matter the locale * Interpreter: fix G83 peck retract to match fanuc * Interpreter: fix G98/G99 to match fanuc retract planes behavior * Interpreter: fix "run from line" when the start line is between a sub definition and its call * Interpreter: give correct errors when rotary axes are commanded to move in canned cycles * Interpreter: improve arc endpoint radius-mismatch error checking * Interpreter: maintain G5x and G92 offsets separately * Interpreter: make current position including all offsets and in the current program units available in parameters 5420-5428 * Interpreter: make EMC version available in named parameters _vminor, _vmajor * Interpreter: make G92 offset rotated coordinate systems correctly * Interpreter: make more errors translatable * Interpreter: many fixes to allow O-call of subroutines from MDI mode * Interpreter: many new tests in the test suite, including the ability to verify errors * Interpreter: new G10 L11 code for tool touch off to fixture instead of active work coordinate system * Interpreter: new unary function EXISTS tells whether a certain parameter exists * Interpreter: search path for subroutines: [RS274NGC]SUBROUTINE_PATH * Interpreter: search path for user M codes: [RS274NGC]USER_M_PATH * Interpreter: detect and error on malformed O-if[] statements . * IOcontrol: make aborting tool changes work . * Kinematics: several improvements to the general serial kinematics module . * Motenc, VTI, Opto_ac5: PCI-related update for new kernel versions . * Motion: allow translations of more error messages * Motion: fix stuttering motion in NURBS * Motion: support for indexing/locking rotary axes . * ngcgui: many new features and bugfixes . * PID: accept external command-deriv and feedback-deriv connections to use a high quality velocity signal when it is available . * pncconf: many new features and bugfixes . * PPMC: improve error messages when cards are not found . * Probing: correctly abort motion when the probe trips during a non-probe MDI command . * Rebranding: rename EMC to LinuxCNC . * TkEMC: display and allow entry of all tool offsets * TkEMC: in Set Coordinates, display the correct axes * TkEMC: only display active axes * TkEMC: show coordinate system in offset widget * TkEMC: show work offsets for all axes . * Touchy: add a spindle speed readout on the manual tab * Touchy: dynamic tabs can embed other applications, including virtual control panels * Touchy: macro capability that uses MDI O-call * Touchy: make single-block switch work like feed hold * Touchy: save maximum velocity (MV) value across runs * Touchy: Selectable tool touch off to workpiece or fixture * Touchy: show all offsets separately in the status information * Touchy: show the total number of lines in the loaded program * Touchy: show which tools are in which pockets * Touchy: support for metric configurations * Touchy: support panel indicators for status readout * Touchy: use appropriate jog and maxvel increments for metric and degrees * Touchy: turning the wheel during a continuous jog changes the current jog speed . * add a G code language spec for gedit * add latencyplot, a strip-chart type display of latency test results Files: 2ebc6f6da18fd031e61eb918187a3fc3 993 misc extra linuxcnc_2.5.0.dsc 9c116b394a969a0fb9305743aaf16e2d 17361879 misc extra linuxcnc_2.5.0.tar.gz 4d81e1c98463032755aa8cb30dfb9690 498022 libs extra linuxcnc-dev_2.5.0_amd64.deb 5b5ef7a29099e1c6a9b5036a2a57f454 8719350 misc extra linuxcnc_2.5.0_amd64.deb 5ef93e505e21a15e5c42892e47055b4a 11703854 misc extra linuxcnc-doc-en_2.5.0_all.deb 1a3179d5662eb673ee575189375feab2 8566678 misc extra linuxcnc-doc-fr_2.5.0_all.deb a071e2448c0485b31509f20814197f4c 11566290 misc extra linuxcnc-doc-de_2.5.0_all.deb 8d264cffc6b49274d9cd2273f97b3b35 11560586 misc extra linuxcnc-doc-es_2.5.0_all.deb 766d13830cc36c5af15218784c48f51f 11552142 misc extra linuxcnc-doc-pl_2.5.0_all.deb