Format: 1.7
Date: Fri, 26 Nov 2010 11:34:57 -0600
Source: emc2
Binary: emc2-sim-dev emc2-sim
Architecture: source i386
Version: 1:2.4.6
Distribution: lucid
Urgency: low
Maintainer: Jeff Epler <jepler@unpythonic.net>
Changed-By: jepler <jepler@unlucky.unpythonic.net>
Description: 
 emc2-sim   - PC based motion controller for real-time Linux
 emc2-sim-dev - PC based motion controller for real-time Linux
Changes: 
 emc2 (1:2.4.6) lucid; urgency=low
 .
   * documentation: various improvements
 .
   * estop_latch: make watchdog behavior match documentation.
 .
   * hostmot2: make gpio pins behave when the value of the pin as an integer was
     not 0 or 1
 .
   * iocontrol: fix current tool information after reloading table
 .
   * near: fix for negative inputs
 .
   * pico/7i43/pluto: if the kernel does not report a base_hi address, make
     an educated guess (fixes the D510MO bug)
   * pico/7i43/pluto: show "linux parport does not support mode" as a warning,
     not an error
 .
   * pncconf: fix spinbox limits on metric configurations
   * pncconf: fix jogging buttons on lathe configs
   * pncconf: add touchy gui choice
   * pncconf: fix spindle-at-speed code
   * pncconf: fix launchers on ubuntu 10.04
   * pncconf: fix firmware directory names for 7i43, 5i22
 .
   * sample configs: add another smithy sample configuration
 .
   * stepconf: fix launchers on ubuntu 10.04
 .
   * touchy: fix display of 3-digit active gcodes
Files: 
 a45574f249bf0ee115cbca131ab10f34 651 misc extra emc2_2.4.6.dsc
 cb5594ee3f87056035a7e5b25d0d89b4 11028357 misc extra emc2_2.4.6.tar.gz
 05c43593c1888c5643ddf24096fa16fa 786536 libs extra emc2-sim-dev_2.4.6_i386.deb
 cfb4599580ca7fed4cfb43271b272d8e 16146752 misc extra emc2-sim_2.4.6_i386.deb